最新免费av在线观看,亚洲综合一区成人在线,中文字幕精品无码一区二区三区,中文人妻av高清一区二区,中文字幕乱偷无码av先锋

ISL5217KIZ Datasheet

  • ISL5217KIZ

  • Quad Programmable Up Converter

  • 43頁

  • INTERSIL   INTERSIL

掃碼查看芯片數據手冊

上傳產品規格書

PDF預覽

ISL5217
Pin Descriptions (all signals are active high unless otherwise stated)
NAME
TXENA,
TXENB,
TXENC,
TXEND
TYPE
I
DESCRIPTION
Transmit Enable A-D. (TXENX) The processing channel selected for this enable will force a channel flush
(conditioned by control word 0x0c, bit 2), clear the data RAMs, and update the selected configuration registers upon
assertion. No additional requests for serial data will be made when TXENX is deasserted, unless conditioned by
control word 0x0c, bit 3. The polarity of TXENX is programmable. Optionally, TXENX can be internally generated
with a programmable duty cycle. Two different programmable TXENX cycles can be programmed and toggled
between based on programmed cycle length. See control word 0x0c, bit 11 and Table 43 for additional details.
Update A-D. (UPDX) The processing channel selected for this input updates the selected configuration registers, if
the associated update mask bit is set. The polarity of UPDX is programmable.
Synchronization Output. The processing of multiple ISL5217 devices can be synchronized through software by
connecting the SYNCO of the master ISL5217 device to an UPDX pin of the ISL5217 slaves. The polarity of SYNCO
is programmable.
Output Data Bus A (19:0). Output bus A contains the digital modulated QUC output samples from Output
Summer/Formatter 1. The samples are updated on the rising edge of the CLK. Bit <19> is the MSB.
Output Data Bus B (19:0). The output bus contains the digital modulated QUC output samples from Output
Summer/Formatter 2. The samples are updated on the rising edge of the CLK. Bit <19> is the MSB.
I Cascade In (19:0) or OUTPUT BUS C. Dual function I/O bus. The bus is configured for input when the output mode
is cascade in. The bus is configured for output for all other output modes.
I Cascade In. Input bus allows multiple parts to be cascaded by routing the digital modulated signal I CAS OUT,
(Bus A), from one QUC into Output Summer/Formatter 1 of a second QUC. I CAS IN (19:0) is in 2鈥檚 complement
format and is sampled on the rising edge of CLK. Bit<19> is the MSB.
Output Data Bus C. The output bus contains the digital modulated QUC output samples from Output
Summer/Formatter 3. The samples are updated on the rising edge of the CLK. Bit <19> is the MSB.
Q Cascade in (19:0) or Output Data Bus D. Dual function I/O bus. The bus is configured for input when the output
mode is cascade in. The bus is configured for output for all other output modes.
Q Cascade in. Input bus allows multiple parts to be cascaded by routing the digital modulated signal Q CAS OUT,
(Bus B), from one QUC into Output Summer/Formatter 2 of a second QUC. Q CAS IN (19:0) is in 2鈥檚 complement
format and is sampled on the rising edge of CLK. Bit<19> is the MSB.
Output Data Bus D. The output bus contains the digital modulated QUC output samples from Output
Summer/Formatter 4. The samples are updated on the rising edge of the CLK. Bit <19> is the MSB.
I data strobe. (active high). Used in the muxed I/Q mode. When asserted, the output data buses contain valid I data.
JTAG Test Mode Select. Internally pulled up.
JTAG Test Data In. Internally pulled up.
JTAG Test Clock.
JTAG Test Reset (Active Low). Internally pulled-up. This pin should be driven by the JTAG logic to obtain a TAP
controller reset, or if JTAG is not utilized, this pin should be tied to ground for normal operation. As recommended
in the 1149.1 standard documentation the TRST test pin should be made active soon after power-up to guarantee
a known state within the TAP logic on the ISL5217. This avoids potential damage due to signal contention at the
circuit鈥檚 inputs and outputs.
JTAG Test Data Out.
(Continued)
UPDA, UPDB,
UPDC, UPDD
SYNCO
I
O
MODULATED DATA (80)
IOUT(19:0)
QOUT(19:0)
IIN(19:0)
O
O
I/O
QIN(19:0)
I/O
ISTRB
TMS
TDI
TCK
TRST
O
I
I
I
I
JTAG TEST ACCESS PORT
TDO
O
5
FN6004.3
July 8, 2005

ISL5217KIZ相關型號PDF文件下載

您可能感興趣的PDF文件資料

熱門IC型號推薦

掃碼下載APP，
一鍵連接廣大的電子世界。

在線人工客服

買家服務：
賣家服務：
技術客服：

0571-85317607

網站技術支持

13606545031

客服在線時間周一至周五
9:00-17:30

關注官方微信號，
第一時間獲取資訊。

建議反饋
返回頂部

建議反饋

聯系人：

聯系方式：

按住滑塊，拖拽到最右邊
>>
感謝您向阿庫提出的寶貴意見，您的參與是維庫提升服務的動力！意見一經采納，將有感恩紅包奉上哦！