最新免费av在线观看,亚洲综合一区成人在线,中文字幕精品无码一区二区三区,中文人妻av高清一区二区,中文字幕乱偷无码av先锋

ISL5217KIZ Datasheet

  • ISL5217KIZ

  • Quad Programmable Up Converter

  • 799.82KB

  • 43頁

  • INTERSIL   INTERSIL

掃碼查看芯片數據手冊

上傳產品規格書

PDF預覽

ISL5217
TABLE 41. I AND Q CHANNEL COEFFICIENTS (15:0)
TYPE: SINGLE CHANNEL INDIRECT, ADDRESS RANGE: 0x100-0x1ff (PAGE 1)
BIT
15:0
NOTES:
Coefficients
RAM Read/Write Procedure (16-bit 2鈥檚 complement format)
Write
access to the Coefficient RAMs when I not equal Q:
1. Enable the
碌P
hold mode by setting bit 12 of the Main Control register 0x0c.
2. Load the RAM data to location 0x14 with the Q coefficient
3. Load the RAM data to location 0x14 with the I coefficient
4. Load the RAM write address to location 0x15. A write strobe transfers the contents of the register at location 0x14 into the RAM location
specified by the contents of the register at location 0x15. (Indirect address[15] =0, Indirect address[9:8]=鈥?1鈥?.
5. Wait 4 clock cycles before performing the next write to the RAM data register.
6. Repeat steps 2-5.
7. Return RAM control back to the channel by disabling the
碌P
hold mode.
Read
access to the I Coefficient RAM:
1. Enable the
碌P
hold mode by setting bit 12 of the Main Control register 0x0c.
2. Load the RAM read address to location 0x15. A read strobe transfers the contents of the RAM location specified by the contents of the register
at location 0x15 onto the read bus. (Indirect address[15] =1, Indirect address[9:8]=鈥?1鈥?.
3. Wait 4 clock cycles before performing the next write to the RAM address register.
4. Repeat steps 2-3.
5. Return RAM control back to the channel by disabling the
碌P
hold mode.
Read
access to the Q Coefficient RAM:
1. Enable the
碌P
hold mode by setting bit 12 of the Main Control register 0x0c.
2. Load the RAM read address to location 0x15. A read strobe transfers the contents of the RAM location specified by the contents of the register
at location 0x15 onto the read bus. (Indirect address[15] =1, Indirect address[9:8] =鈥?0鈥?.
3. Wait 4 clock cycles before performing the next write to the RAM address register.
4. After all data has been loaded, return RAM control back to the channel by disabling the
碌P
hold mode
Coefficients
RAM Read/Write Procedure (24-bit floating point format)
Write
access to the Coefficient RAMs:
1. Enable the
碌P
hold mode by setting bit 12 of the Main Control register 0x0c.
2. Load the RAM data to location 0x14 with the iCoef<3:0>, iShift<3:0>, qCoef<3:0>, qShift<3:0>.
3. Load the RAM data to location 0x14 with the qCoef<19:4>.
4. Load the RAM data to location 0x14 with the iCoef<19:4>.
5. Load the RAM write address to location 0x15. A write strobe transfers the contents of the three previously loaded registers at location 0x14
into the RAM location specified by the contents of the register at location 0x15. (Indirect address[15] =0, Indirect address[9:8] =鈥?1鈥?.
6. Wait 4 clock cycles before performing the next write to the RAM data register.
7. Repeat steps 2-6.
8. Return RAM control back to the channel by disabling the
碌P
hold mode.
Read
access to the Coefficient RAM:
1. Enable the
碌P
hold mode by setting bit 12 of the Main Control register 0x0c.
2. Load the RAM read address to location 0x15. Three read strobes are required to transfers the contents of the RAM location specified by the
contents of the register at location 0x15 onto the read bus. Indirect address[15] =1, Indirect address[9:8] =鈥?1鈥? reads back the iCoef value,
Indirect address[15] =1, Indirect address[9:8] =鈥?0鈥? reads back the qCoef value, Indirect address[15] =1, Indirect address[9:8] =鈥?1鈥? reads
back the iCoef<3:0>, iShift<3:0>, qCoef<3:0>, qShift<3:0> value.
3. Wait 4 clock cycles between all of the above writes before performing the next write to the Ram address register.
4. Repeat steps 2-3.
5. Return RAM control back to the channel by disabling the
碌P
hold mode.
FUNCTION
Filter coefficient
DESCRIPTION
256 location RAM. Use this page when the I and Q coefficients are different.
36
FN6004.3
July 8, 2005

ISL5217KIZ相關型號PDF文件下載

您可能感興趣的PDF文件資料

熱門IC型號推薦

掃碼下載APP，
一鍵連接廣大的電子世界。

在線人工客服

買家服務：
賣家服務：
技術客服：

0571-85317607

網站技術支持

13606545031

客服在線時間周一至周五
9:00-17:30

關注官方微信號，
第一時間獲取資訊。

建議反饋
返回頂部

建議反饋

聯系人：

聯系方式：

按住滑塊，拖拽到最右邊
>>
感謝您向阿庫提出的寶貴意見，您的參與是維庫提升服務的動力！意見一經采納，將有感恩紅包奉上哦！