ADIS16003
PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
SCLK
V
CC
12
11
10
CS
TCS
1
9
XFILT
ADIS16003
DOUT
2
TOP VIEW
(Not to Scale)
8
YFILT
DIN
3
7
NC
4
5
6
NC
COM
ST
NC = NO CONNECT
Figure 6. Pin Configuration
Table 5. Pin Function Descriptions
Pin No.
1
2
3
4
5, 7
6
8
9
10
11
12
Mnemonic
TCS
DOUT
DIN
COM
NC
ST
YFILT
XFILT
CS
V
CC
SCLK
Description
Temperature Chip Select. Active low logic input. This input frames the serial data transfer for the temperature
sensor output.
Data Out, Logic Output. The conversion of the ADIS16003 is provided on this output as a serial data stream.
The bits are clocked out on the falling edge of the SCLK input.
Data In, Logic Input. Data to be written into the ADIS16003鈥檚 control register is provided on this input and
is clocked into the register on the rising edge of SCLK.
Common. Reference point for all circuitry on the ADIS16003.
No Connect.
Self-Test Input. Active high logic input. Simulates a nominal 0.75
g
test input for diagnostic purpose.
Y Channel Filter Node. Used in conjunction with an optional external capacitor to band-limit the ac signal
from the accelerometer.
X Channel Filter Node. Used in conjunction with an optional external capacitor to band-limit the ac signal
from the accelerometer.
Chip Select. Active low logic input. This input provides the dual function of initiating the accelerometer
conversions on the ADIS16003 and frames the serial data transfer for the accelerometer output.
Power Supply Input. The V
CC
range for the ADIS16003 is from 3.0 V to 5.25 V.
Serial Clock, Logic Input. SCLK provides the serial clock for accessing data from the part and writing serial data
to the control register. This clock input is also used as the clock source for the ADIS16003鈥檚 conversion process.
Rev. 0 | Page 7 of 16
05463-005