K4D553238F-GC
ABSOLUTE MAXIMUM RATINGS
Parameter
Voltage on any pin relative to Vss
Voltage on V
DD
supply relative to Vss
Voltage on V
DD
supply relative to Vss
Storage temperature
Power dissipation
Short circuit current
Symbol
V
IN
, V
OUT
V
DD
V
DDQ
T
STG
P
D
I
OS
256M GDDR SDRAM
Value
-0.5 ~ 3.6
-1.0 ~ 3.6
-0.5 ~ 3.6
-55 ~ +150
3.3
50
Unit
V
V
V
擄C
W
mA
Note :
Permanent device damage may occur if ABSOLUTE MAXIMUM RATINGS are exceeded.
Functional operation should be restricted to recommended operating condition.
Exposure to higher than recommended voltage for extended periods of time could affect device reliability.
POWER & DC OPERATING CONDITIONS(SSTL_2 In/Out)
Recommended operating conditions(Voltage referenced to V
SS
=0V, T
A
=0 to 65擄C)
Parameter
Device Supply voltage
Output Supply voltage
Reference voltage
Termination voltage
Input logic high voltage
Input logic low voltage
Output logic high voltage
Output logic low voltage
Input leakage current
Output leakage current
Symbol
V
DD
V
DDQ
V
REF
Vtt
V
IH(DC)
V
IL(DC)
V
OH
V
OL
I
IL
I
OL
Min
2.375
2.375
0.49*V
DDQ
V
REF
-0.04
V
REF
+0.15
-0.30
Vtt+0.76
-
-5
-5
Typ
2.5
2.5
-
V
REF
-
-
-
-
-
-
Max
2.625
2.625
0.51*V
DDQ
V
REF
+0.04
V
DDQ
+0.30
V
REF
-0.15
-
Vtt-0.76
5
5
Unit
V
V
V
V
V
V
V
V
uA
uA
Note
1
1
2
3
4
5
I
OH
=-15.2mA, 7
I
OL
=+15.2mA, 7
6
6
Note :
1. Under all conditions VDDQ must be less than or equal to VDD.
2. VREF is expected to equal 0.50*VDDQ of the transmitting device and to track variations in the DC level of the same. Peak to
peak noise on the VREF may not exceed + 2% of the DC value.
3. Vtt of the transmitting device must track VREF of the receiving device.
4. VIH(max.)= VDDQ +1.5V for a pulse width and it can not be greater than 1/3 of the cycle rate.
5. VIL(mim.)= -1.5V for a pulse width and it can not be greater than 1/3 of the cycle rate.
6. For any pin under test input of 0V < VIN < VDD is acceptable. For all other pins that are not under test VIN=0V.
7. Output logic high voltage and low voltage is depend on output channel condition.
- 10 -
Rev 1.3 (Mar. 2005)