Test & Burn-In Grid ZIP Sockets
Pin Grid Arrays
Top
Handle Side
10 x 10
11 x11
13 x 13
15 x 15
17 x 17
19 x19
21 x 21
25 x 25
Front
Mark Indications:
茠
No holes, no contacts
Holes only, no contacts
Holes with contacts
Notes:
1. This is only a work sheet. Do not proceed with any layout until a part number is assigned by
Textool. The pattern is subject to repositioning.
2. Lead diameter = .022 [ 0.56 ] max, .014 [ 0.36 ] min. The standard socket has been designed
to accept these lead diameters only. For all others please consult the factory.
3. Use this sheet to indicate which positions you intend to use.
4. Remember: for best results, keep your patterns as symmetrical with the centerline as possible.
5. The contact point for all sizes is .085 [ 2.16 ] below th top surface and we recommend a
e
device lead length of .100 [ 2.54 ] below the solder standoffs.
3M Electronic Handling and Protection Division
6801 River Place Blvd.
Austin, TX 78726-9000
TS-0358-12
Sheet 4 of 4
For technical, sales or ordering informationl cal
800-328-0411
or visit our website
http://www.3M.com/ehpd
: