Figure 1.1
Hardware Connections for the LSI Logic Host Adapter
Fibre Channel
Link Activity/
Link Fault LED
SFF Optical
Connector
LSI Logic Host Adapter
PCI Bus Edge Connector J1
Step 7. Carefully insert edge connector J1 (see
Figure 1.1)
of the host
adapter into the PCI slot.
Make sure the edge connector is properly aligned before
pressing the board into place as shown in
Figure 1.2.
The
bracket around connector J2 should 鏗乼 where you removed the
blank panel.
Detailed Installation Procedure
Rev. 2.0
Copyright 漏 2002 by LSI Logic Corporation. All rights reserved.
1-5