Measurement stops in Protect Mode.
鈥?/div>
Depending on the output type of the model used, some parameters (indicated in
displayed (and hence cannot be set).
) are not
RUN Mode
Press the ESC Key
and Up Key
for 1 s.
Protect Mode
Protect menu
All key protection
Press the Mode
Key for 1 s.
Set value change
prohibition
Maximum/minimum
value reset prohibition
prot
all
(See
note.)
sUset
Displayed only for
models with
comparative outputs.
mm.rst
Menus protected
in Setting Mode
secr
Key-protection ON:
kpon
Key-protection OFF:
kpoff
Note: Press the Shift Key
to make it
possible to set or change parameters.
Menu display
Parameter display
Meaning of parameter
All key protection:
All key operations are prohibited in
RUN Mode. (If all key protection is
ON, only the key for going to Protect
Mode is enabled.)
Set value change prohibition:
Changes to comparative set values
are prohibited in RUN Mode. (Dis-
played only for models with compara-
tive outputs.)
Reset prohibition:
Resetting the counting value using
the front panel keys is prohibited.
(Resetting by external signals is not
prohibited.)
Menus protected in Setting Mode:
Setting operations in Setting Mode
are prohibited in the way shown be-
low.
Setting menu
0
Set value menu
Scaling menu
Setup menu
Option menu
脳
Setting
1
2
脳
脳
脳
脳
Setting range
Setting key
(See note.)
Use the Up Key
to
change the setting.
鉃?/div>
prot
Press the Mode Key
to display the parameter.
all
Setting:
Next parameter:
kpon
鉃?/div>
kpoff
sUset
Setting:
Next parameter:
Use the Mode Key
to enable the set-
kpon
ting and move to the
Key protection ON:
next parameter.
Key protection OFF:
kpoff
reset
Press the ESC Key
to return to the menu.
Setting:
Next parameter:
secr
Setting:
Use the Up Key
to
change the setting.
鉃?/div>
Next parameter:
1
鉃?/div>
2
鉃?/div>
3
0
/1/2
Use the Mode Key
to enable the set-
ting and move to the
next parameter.
Note:
If there is no key operation for 5 seconds, the setting is automatically registered.
C-152
Up/Down Counting Meter
K3NC
prev
next
K3NC-PB2A相關(guān)型號(hào)PDF文件下載