最新免费av在线观看,亚洲综合一区成人在线,中文字幕精品无码一区二区三区,中文人妻av高清一区二区,中文字幕乱偷无码av先锋

CS8416-CS Datasheet

  • CS8416-CS

  • Cirrus Logic [192 kHZ DIGITAL AUDIO INTERFACE RECEIVER]

  • 764.03KB

  • CIRRUS

掃碼查看芯片數據手冊

上傳產品規格書

PDF預覽

CS8416
14 APPENDIX A: EXTERNAL
AES3/SPDIF/IEC60958 RECEIVER
COMPONENTS
14.1
AES3 Receiver External Components
The CS8416 AES3 receiver is designed to accept
both the professional and consumer interfaces. The
digital audio specifications for professional use call
for a balanced receiver, using XLR connectors,
with 110
鈩?/div>
鹵20% impedance. The XLR connector
on the receiver should have female pins with a male
shell. Since the receiver has a very high input im-
pedance, a 110
鈩?/div>
resistor should be placed across
the receiver terminals to match the line impedance,
as shown in
Figure 14
and
Figure 15.
Although
transformers are not required by the AES, they are,
however, strongly recommended.
If some isolation is desired without the use of trans-
formers, a 0.01碌F capacitor should be placed in se-
ries with each input pin (RXP0 and RXN0) as
shown in Figure . However, if a transformer is not
used, high frequency energy could be coupled into
the receiver, causing degradation in analog perfor-
mance.
Figure 14
and
Figure 15
show an optional DC
blocking capacitor (0.1碌F to 0.47
碌F)
in series with
the cable input. This improves the robustness of the
receiver, preventing the saturation of the trans-
former, or any DC current flow, if a DC voltage is
present on the cable.
In the configuration of systems, it is important to
avoid ground loops and DC current flowing down
the shield of the cable that could result when boxes
with different ground potentials are connected.
Generally, it is good practice to ground the shield
to the chassis of the transmitting unit, and connect
the shield through a capacitor to chassis ground at
the receiver. However, in some cases it is advanta-
geous to have the ground of two boxes held to the
same potential, and the cable shield might be de-
pended upon to make that electrical connection.
Generally, it may be a good idea to provide the op-
tion of grounding or capacitively coupling the
shield to the chassis.
In the case of the consumer interface, the standards
call for an unbalanced circuit having a receiver im-
pedance of 75
鈩?/div>
鹵5%. The connector for the con-
sumer interface is an RCA phono socket. The
receiver circuit for the consumer interface is shown
in Figure .
Figure
shows an implementation of the
Input S/PDIF Multiplexer using the consumer in-
terface.
The circuit shown in
Figure
may be used when ex-
ternal RS422 receivers, optical receivers or other
TTL/CMOS logic outputs drive the CS8416 receiv-
er section.
14.2
Isolating Transformer Requirements
Please refer to the application note AN134:
AES
and SPDIF Recommended Transformers
for re-
sources on transformer selection.
DS578PP2
45

CS8416-CS PDF文件相關型號

CS8416-CZ

CS8416-CS相關型號PDF文件下載

掃碼下載APP，
一鍵連接廣大的電子世界。

在線人工客服

買家服務：
賣家服務：
技術客服：

0571-85317607

網站技術支持

13606545031

客服在線時間周一至周五
9:00-17:30

關注官方微信號，
第一時間獲取資訊。

建議反饋

聯系人：

聯系方式：

按住滑塊，拖拽到最右邊
>>
感謝您向阿庫提出的寶貴意見，您的參與是維庫提升服務的動力！意見一經采納，將有感恩紅包奉上哦！