碌
PD6461, 6462
(2) For LSB-first transfer (Command bits are input starting from the LSB (D0). The function of each bit is the same as
that for MSB-first transfer.)
(LSB)
D0
V
C2
D1
BL
D2
B
D3
G
D4
R
D5
RV
D6
1
D7
1
D8
C0
D9
C1
D10
C2
D11
C3
D12
C4
D13
C5
D14
C6
(MSB)
D15
C7
鈥?Character pattern specification bits
These bits are used to specify the address of the character pattern to be used. Address FEH (
碌
PD6461)/7EH
(
碌
PD6462) indicates display-off data and address FFH (
碌
PD6461)/7FH (
碌
PD6462) indicates the end code for second-
byte continuous input. The design of each character pattern can be modified by specifying a mask code option (except
for addresses FEH and FFH (
碌
PD6461)/7EH and 7FH (
碌
PD6462)).
鈥?V
C2
channel specification bit
This bit is used to specify whether each character is output to the V
C2
channel. Characters for which the V
C2
channel
is specified are not output to the RGB or V
C1
channel (This bit is invalid in RGB+3BLK mode).
鈥?Blinking control bit
This bit is used to enable or disable blinking for each character. Blinking of characters is turned on/off for the entire
screen with the character display control command (refer to
3.2 CHARACTER DISPLAY CONTROL COMMAND).
鈥?Character color specification bits
These bits are used to specify the color of each character (These bits are valid only for the RGB channel. Only
a single color can be used for the V
C1
and V
C2
channels).
鈥?Reversing control bit
This bit is used to enable or disable reversing for each character. The characters of the entire screen are reversed
with the character reverse on/off command (refer to
3.5 CHARACTER REVERSE ON/OFF COMMAND).
37